Network Administration; Ip Settings - Unify OpenScape Cordless IP V2 Administrator Documentation

5 Network administration

5.1 IP settings

This page is used to integrate the DECT multicell system into your company's local network.
 Settings Network
If you change the IP address of the device or an error occurs when you are changing the IP settings,
the connection to the web User Interface may be lost.
IP address changed:
An error occurred:
Device name in the network
 Enter a label for the device. It is used to identify the device in network communication.
Network type
 Select the IP protocol used in your local network: Currently only IPv4 is supported.
P31003C1020M1000276A9, 01/2018
OpenScape Cordless IP V2, Administrator Documentation
IP
 Re-establish the connection with the new address.
 Reset the device to the factory settings.
Defining the device role (
Network administration
p. 12)
IP settings
23