Unify OpenScape Cordless IP V2 Administrator Documentation page 58

Mobile devices
Handset Registration Centre
The page also shows the DECT managers that currently are ready to register handsets. As this
version only supports the use of one DECT manager, the information is not meaningful at present.
8.3.1 Registering handsets time-controlled
Shows the current system time. Time settings:
 In the Registration start time field enter the time when the next registration process should be started. Format:
YYYY-MM-DD HH:mm.
 Click on Start now. . . . the DECT manager starts a registration process at the given time. If no time is set, the
DECT manager will start registration at once.
Setting the registration duration
 In the Registration duration fields determine how long (days, hours, minutes and seconds) the DECT manager
should stay in registration mode. Default: 3 min.
Closing the window and resetting the timers
 Click on Close . . . the registration window is closed, the time settings are reset.
When the first handset tries to register, the base closes the registration window and finalises the
registration within a very few seconds. During this time any second handset registration attempt
would be rejected. When the first handset is fully registered the base re-opens the registration
window as long as defined with the Registration start time and Registration duration parameters.
If all handsets try to register in parallel, a lot of them will enter the base one by one and so will be
successfully registered, but others might enter while another registration is not yet completed and so
they will be rejected.
Single handsets that are rejected have to be registered by a new registration procedure or manually.
58
p. 81
OpenScape Cordless IP V2, Administrator Documentation
P31003C1020M1000276A9, 01/2018