Assembling The Pump Head - ProMinent vonTaine 1010 PP Assembly And Operating Instructions Manual

6.3 Assembling the pump head

I.
Fig. 12: Assembling the pump head
Moving the impeller magnet.
After assembling the pump head, the impeller with
the magnet (847.1) should still move axially on the
centring shaft (211).
II.
*
1. Fit the slide bearing (310). * pay attention to the anti-turn
locking device.
Tool: manual toggle press.
2. Press the impeller (230) onto the impeller magnet (847.1). *
pay attention to the anti-turn locking device.
Tool: manual toggle press + plastic thrust washer Ø 80 mm.
Maintenance/Servicing
*
A2927
25