Table of Contents
Advertisement
4
Arrangement/Installation
4.1 Assembly
User qualification, mechanical installation: trained and qualified
n
Ä Chapter 2.2 'User qualification' on page 9
personnel, see
User qualification, hydraulic installation: trained and qualified
n
Ä Chapter 2.2 'User qualification' on page 9
personnel, see
User qualification, electrical installation: electrical technician,
n
Ä Chapter 2.2 'User qualification' on page 9
see
Select the installation location so that the pump is easily acces‐
sible.
Adhere to the following ambient conditions:
Ambient temperature -10 ... +40°C *
n
Air humidity, max. 95% relative humidity, non-condensing
n
* In doing so, note the freezing point of the liquid to be pumped. Do
not allow the liquid to freeze in the pump.
WARNING!
Danger from hazardous substances!
Possible consequence: Fatal or very serious inju‐
ries.
Please ensure when handling hazardous sub‐
stances that you have read the latest safety data
sheets provided by the manufacture of the haz‐
ardous substance. The actions required are
described in the safety data sheet. Check the
safety data sheet regularly and replace, if neces‐
sary, as the hazard potential of a substance can be
re-evaluated at any time based on new findings.
The system operator is responsible for ensuring
that these safety data sheets are available and that
they are kept up to date, as well as for producing
an associated hazard assessment for the worksta‐
tions affected.
Fig. 4: Installation example
1.
Assemble the pump horizontally or vertically, making sure
that the motor points upwards.
2.
The pump is not self-priming and needs a feed. Assemble
the pump so that the medium to be pumped flows automati‐
cally to the pump, see .
Arrangement/Installation
A2425
13
Advertisement
Table of Contents
