Table of Contents
Advertisement
6.2 Dismantling the pump head
I.
III.
Fig. 10: Dismantling the pump head
II.
IV.
1.
Loosen the 6 screws (901.1) on the pump housing (101).
Tool: jaw spanner/box wrench AF10.
2.
Carefully pull the pump head assembly (001) from the
housing (113).
Tool: lever.
3.
Remove the pump housing (101) from the centring shaft
(211). Remove the impeller magnet (847.1) with the impeller
(230) out of the housing split case (161).
4.
Press the slide bearing (310) backwards out of the impeller
magnet (847.1).
Tool: manual toggle press + Ø 20 mm pin.
Maintenance/Servicing
A2925
23
Advertisement
Table of Contents
