Assa Abloy Corbin Russwin Access 700 ED500N Series Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Assa Abloy Manuals
  4. Door locks
  5. Corbin Russwin Access 700 ED500N Series
  6. Installation instructions manual
Assa Abloy Corbin Russwin Access 700 ED500N Series Installation Instructions Manual

Assa Abloy Corbin Russwin Access 700 ED500N Series Installation Instructions Manual

Exit devices for trim
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
700
Installation Instructions
ED5000(S)N Series Exit Devices For
9700 TCPIP1 & PWI1 Series Trim
(Includes: Rim and SecureBolt™)
Please read these instructions carefully to prevent missing important steps.
Please Note: Improper installations may result in damage to the lock and void the factory warranty.
Important: The accuracy of the door preparation is critical for proper functioning and security of this lock.
Misalignment can cause premature wear and a lessening of security.
For Technical Assistance call Corbin Russwin at 1-800-810-WIRE (9473)
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
All manuals and user guides at all-guides.com
TCPWI1/TCPIP1
™
Attention Installer
FM326 03/18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Corbin Russwin Access 700 ED500N Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Assa Abloy Corbin Russwin Access 700 ED500N Series

Summary of Contents for Assa Abloy Corbin Russwin Access 700 ED500N Series

  • Page 1 Misalignment can cause premature wear and a lessening of security. For Technical Assistance call Corbin Russwin at 1-800-810-WIRE (9473) Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the...

  • Page 2: Table Of Contents

    This product is not intended for outside wiring per NFPA 70 To comply with “Fire Listed” doors, the batteries must be replaced with alkaline batteries only. Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the...

  • Page 3: General Description

    UL Listed model 9001GR/AC injector; manufactured or call 800-810-WIRE. by Microsemi Corp. Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

  • Page 4: Product Illustration

    Door Position Switch (DPS) Kit *Bluetooth Smart option ® Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

  • Page 5: Rim Exit Installation Instructions

    Through-bolt Holes Through-bolt Holes Trim Tailpiece Hole Fig. 2 Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 6 Cam must be postitioned as shown when cylinder tailpiece is assembled Fig. 3b Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 7 Fig. 4a (door not shown) Tighten securely Tailpiece Fig. 4b Fig. 4c Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 8 Fig. 5a Important Note: Rim Exit Installation Continues on Page 13 - Section 7 Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

  • Page 9: Mortise Exit Installation Instructions

    Wire Hole Trim Tailpiece Hole Through-bolt Holes Fig. 2 Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 10 Fasten trim assembly to door using (2) 1/4-20 oval head screws and (2) finish washers (Fig. 3b). Note: Finger tighten only. Fig. 3a Fig. 3b Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

  • Page 11: Install Exit Device

    Tighten all (4) screws (Fig. 4b). Tighten securely Fig. 4b Fig. 4a Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 12 Fig. 5b Important Note: Mortise Exit Installation Continues on Page 13 - Section 7 Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

  • Page 13: Install Outside Escutcheon

    If you are installing PIP (PoE) continue to the next page Section 8 - PIP (PoE) Wiring & Installation Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the...

  • Page 14: Pip (Poe) Installation & Wiring

    (not required for ML207xx) * Door width determines length Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 15 Secured to Lock Mounting Plate Wiring to TIA/EIA 568-B Standard Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 16 • 6-pin female molex connector with ground wire 6-pin F Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 17 2. Using the ring terminal, carefully route the assembly through the door channel toward lock. Harness (cat5e) Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 18 Install four (4) #8-32 machine screws and two (2) #8 surface screws (Fig. 8a). Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

  • Page 19: Installation Of Connectors

    Fig. 9B Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 20 (Fig. 10c). Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 21 End of PIP (PoE) Installation Instructions Proceed to Section 10 - Operational Check Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

  • Page 22: Pwi (Wireless) Installation

    (4) #8 - 32 x 1-7/8" Flat Head Machine Screws (Through-bolts) Fig. 12b Fig. 12a Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 23 E. Secure the 24-pin card reader connector. Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 24 If there is resistance when securing, detach controller to determine cause before re-attaching controller. Fig. 14 Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
  • Page 25 Coin Cell Pull Fig. 15a Fig. 15b Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

  • Page 26: Operational Check

    *Refer to Lock Configuration Tool (LCT) user manual (WFMN1) for information on how to configure and program locks. Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the...
  • Page 27 All manuals and user guides at all-guides.com...
  • Page 28 All manuals and user guides at all-guides.com ED5000N Series Exit Devices Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

This manual is also suitable for:

Corbin russwin access 700 ed500sn seriesCorbin russwin access 700 tcpwi1 seriesCorbin russwin access 700 tcpip1 series

Table of Contents