MICRO-EPSILON capaNCDT 6110 Quick Manual page 10

Commissioning
Commissioning
Power Supply, Display/Output Device DT6110, DT6112
The power supply and signal output occur via the 5-pin connector on the front side of the controller.
PIN Wire color
SCAC3/5
1 white
2 gray
3 yellow
4 green
5 brown
Shield
SCAC3/5 is a 3 m long, pre-assembled power supply and output cable.
1) Current output with DT6110/IP/I
capaNCDT 6110 / 6112 / 6120
Signal Description
+24 V +24 V power supply
GND Supply ground
- not used
Analog ground
AGND
(for signal output)
Signal output
U-out
1
(load, min 10 kOhm)
Cable shield, housing
View: solder side, 5-pin.
female cable connector
Connection power supply
SCAC3/5 power supply and
output cable
Page 10