RC Electronics FENIX User Manual page 30

FENIX – user's manual
3.2.2.4 Transfer
Entering in to Transfer page a list will be displayed from which the pilot can select a desired file
to be copied in to the device.
To copy new files, the pilot must have the files saved to the external SD card. Once the SD card
is inserted to front slot, please perform the following steps.
Current reference steps are for copping Airspace file, but the process is valid for all file types.
Select sub-menu for desired file transfer. In
this case we selected Airspace.
To copy new file to the device, select Load.
Figure 31: Airspace file copy.
Figure 32: Load external SD files.
29
Document Revision: 0.1
December 2020