FENIX – user's manual
Document Revision: 0.1
December 2020
2.5 Device shutdown
2.5.1 Loss of main input power
Device will automatically go in to shutdown procedure after loss of main input power is
detected, unit is not in flight and there is no human interaction via rotary knobs for 2min.
2.5.2 Manual shutdown
To do so, press & hold bottom rotary knob for around 4 seconds until Turn off dialogue pops up.
Confirm turn off by clicking again the lower rotary knob.
Figure 2: Turn-off dialogue.
2.5.3 Hard shutdown
By holding bottom rotary knob for 8 second, the Fenix will shutdown himself with no graphical
indication. This is also known as hard shutdown.
WARNING
By choosing hard shutdown procedure, some data can be lost or corrupted.
PLEASE USE THIS PROCEDURE ONLY IN CASE, IF MANUAL SHUTDOWN CANNOT BE
EXECUTED!
9