RC Electronics FENIX User Manual page 27

FENIX – user's manual
"Airspace" warning that will indicate when
airspace is nearby. Warning for particular
airspace will be disabled for the day with
short press on bottom knob or put in snooze
for 10 minutes with upper knob.
NOTE
Airspace confirmation is only valid until
the landing. After new takeoff, airspace
warning will be displayed again.
3.2.1.5 Voice
In the "Voice" setup sub-menu the pilot can adjust volume and mixer setting for voice
warnings. Sub-menu also includes setting for additional voice alerts, which can be left disable or
enabled for use during a flight. The "Voice" sub-menu includes following settings:
➢ Volume
Range: 0% to 100%
➢ Flarm traffic
Options:
o Enable
o Disable
➢ Flarm obstacle
Options:
o Enable
o Disable
➢ Flarm v. distance
Options:
o Enable
o Disable
➢ Mix (vario - voice)
Range: 0% to 100%
➢ Flarm warnings
Options:
o Enable
o Disable
➢ Flarm h. distance
Options:
o Enable
o Disable
Figure 29: "Airspace" warning view.
26
Document Revision: 0.1
December 2020