Navbox Subpage - RC Electronics FENIX User Manual

FENIX – user's manual

3.1.6 Navbox subpage

The sub-menu "Select navbox" is where pilot can set number of navboxes on main screen for
each flight mode, type of needle for each flight mode and type of navbox displayed. To enter
"Select navbox" sub-menu, pilot must press and hold bottom rotary knob for 3 seconds and
then release it.
Needle can show:
 Vario
 SC
 Netto
 Relative
Figure 11: Page "Select navbox"
14
Document Revision: 0.1
December 2020