Table of Contents
Advertisement
FENIX – user's manual
Document Revision: 0.1
December 2020
3.1.6.1
Customizing displayed navigational data
Information's displayed on main and side screen are specified by "Set navbox" sub-page. By
confirming selection, pilot will enter on main page for customization of displayed navigational
data.
Figure 12: Option for change navigational informational
Figure 13: Main page ready for customization
One's on main customization page, first position of navbox data will be colored yellow. This
gives indication of current selected navbox position, ready to be customize. Pilot can scroll this
indicator through displayed navbox data by rotating bottom rotary knob.
If indicator on main screen is set at first navbox postion, rotating bottom rotary knob CCW will
move position indicator to side screens. The same principle applies, if indicator on main screen
is set at last navbox position, rotating CW will also move position indicator to side screens.
With the indicator position set, confirm selected position to continue setting customization.
15
Advertisement
Table of Contents
