Setup Page; User Setting - RC Electronics FENIX User Manual

FENIX – user's manual

3.2 Setup page

At setup page, configurations for system and user settings can be customize to the current pilot
and glider.
The user setting contains saved pilot profile. Every profile is saved into internal device memory,
so for the user settings needs to be entered only once. Selection of the profile is confirmed
during device power up stage and it will adapt all user setting.
System setting do not relate for pilot profile but to setting of the glider, device internals
periphery, external connected segments to the device, etc. System setting are set only once.

3.2.1 User setting

User settings or pilot profile setting includes following sub-menus:
➢ Pilot
➢ Logger
➢ Pages
Figure 22: "Setup" page view
➢ Vario/SC
➢ Warnings
20
Document Revision: 0.1
December 2020
➢ Units
➢ Voice