Operating Instructions - Jacto DJB-20S Operator's Manual

8.2. Assembling the lance to the trigger valve
WARNING!
Do not overtighten the screw cap.
• Fit the lance into the trigger valve and thread enough so that there is no leak-
age, as shown in the image below:
trigger valve
• Next, fit the trigger valve in the spray lance.
Spray lance
8.3. Assembling the hose to the sprayer
• Plug the connector into the quick coupler and press until it clicks.
NOTE: To fit the quick coupler more easily, apply graphite-based grease around
the connector sealing ring.
8.4. Installing the electric cord in the hose
• For better and safer use of the equipment, use fasteners to secure the electric
cord to the hose.
Fastener
• Fit the fasteners separately to secure the entire cord to the hose.
8.5. Shoulder strap adjust
The tank is contoured for the operator comfort. The shoulder straps can be quickly
adjusted to properly position the sprayer on the operator's back.
• Close the buckle to better adjust the strap and ensure the safety of the oper-
ator and the equipment.
Buckle
8/52
hose
trigger valve
Quick coupler
Hose
Electric cord
• Use the buckles to adjust the strap as desired.
Buckle
8.6. Installing and removing the battery
To install the battery:
1. Locate the battery housing, on the bottom of the sprayer's base, as shown
in the figure.
2. Identify the correct battery position according to the position guides. Do
not force to install the battery in the wrong position.
3. Press the battery until a "click" is heard.
To remove the battery:
1.
Press both locking buttons;
2. Pull the battery out of the
battery housing.

9. Operating Instructions

The following steps describe how to safely use the sprayer.
9.1. Choosing nozzle type
Our sprayers are compatible with all ISO certified nozzles or hydraulic tips. Each
nozzle offers a range of options and specifications for product application, so it
is extremely important to know how to choose the right nozzle for your equip-
ment. See the table below to identify which nozzle is best suited for flow rate and
droplet size
NOTE: The following nozzles are optional, so they do not accompany this sprayer.
Nozzle
Identification (code)
type
JEF 8001 orange (1197534)
JEF 80015 green (1197535)
JEF 8002 yellow (1197536)
JSF 11001 orange (1197473)
JSF 110015 green (1197475)
JSF 11002 yellow (1197476)
JHC 80015 green (1197555)
JHC 8002 yellow (1197565)
JHC 8003 blue (1197571)
JDF 02 yellow (1197483)
JDF 03 blue (1197485)
JDF 03 red (1197486)
AirMix 110015 green (255091)
AirMix 11002 yellow (255109)
AirMix 110025 lilac (255177)
Flow
Droplet size
Pressure
rate
(psi) (vmd )
(l/min)
45 VF 0,40
45 VF 0,60
45 VF 0,80
30 F 0,33
30 F 0,49
30 F 0,65
60 F 0,69
60 F 0,92
60 F 1,36
30 M 0,65
30 M 0,98
30 M 1,31
20 C 0,41
20 C 0,54
20 C 0,68