Advertisement

Quick Links

Statement of limited
MÁQUINAS AGRÍCOLAS JACTO S.A. shall warrant the equipment described in
this manual and shall repair or replace parts and components which, under normal
operation and wear, in accordance with technical recommendations, show DEFECTS
IN MATERIAL OR WORKMANSHIP, based on the following conditions.
WARRANT Y PERIOD
∙ 01 (one) year from the date of sale to the original purchaser.
WARRANTY APPLICATION
∙ JACTO shall honor this warranty, free of charge, if any part or component shows defect
in MATERIAL OR WORKMANSHIP, after final analysis at the factory.
THIS WARRANTY SHALL BE NULL & VOID IN CASE OF:
∙ Misuse of the equipment against specifications in the OPERATOR'S MANUAL, overwork
or accidents. Preventive/remedial maintenance performed by unauthorized people.
∙ Use of parts and components not supplied by JACTO. Modification of the equipment
or any characteristic of the original design.
THIS WARRANTY SHALL EXCLUDE:
∙ Parts which show wear and tear due to use, UNLESS THEY SHOW DEFECTS IN
WORKMANSHIP, ASSEMBLY OR MATERIAL.
∙ Damages resulting from accidents.
∙ Transportation or freight of the equipment, parts and components in case such warranty is
not approved.
GENERAL INFORMATION:
∙ Parts replaced within the warranty period shall be property of JACTO.
∙ The warranty on replaced parts and components shall expire together with the equi-
pment warranty period.
∙ Eventual delays in performing services shall not give the owner right either to indemnity
or to extension of the warranty period.
∙ JACTO reserves the right to modify its products or to interrupt the manufacture without prior
notice.
Jacto SP 312 / SP 416
JACTO SP 312 / SP 416
English version / MI_USA - 0474
Edition: 09/2012
Code: 1177038
Operator´s manual
Jacto Incorporated
19217 SW 119
Ave.
th
Tualatin, OR 97062 - United States of America
Phone: 1-800-522-8610
E-mail: info@jacto.com / export@jacto.com.br
Home page: www.jacto.com
Made in Thailand

Advertisement

Table of Contents
loading

Summary of Contents for Jacto SP 312

  • Page 1 ∙ 01 (one) year from the date of sale to the original purchaser. WARRANTY APPLICATION ∙ JACTO shall honor this warranty, free of charge, if any part or component shows defect English version / MI_USA - 0474 in MATERIAL OR WORKMANSHIP, after final analysis at the factory.
  • Page 2: Parts List

    Introduction Parts list Jacto SP 312 / SP 416 Jacto SP 312 / SP 416 This manual contains information for Carefully read and follow the instruc- DESCRIPTION DESCRIPTION the proper assembly, operation and tions contained in this manual before 1198800 Washers and cotter...
  • Page 3: Installing The Shaft

    Parts list Assembly Jacto SP 312 / SP 416 Jacto SP 312 / SP 416 Contents of the assembly bag 1∙ Assembly bag 2∙ Lever 3∙ Lance 4∙ Rod 5∙ Trigger valve 6∙ Manual 7∙ Tank ATTENTION! Be careful when taking the sprayer out of the carton because the lever is shipped loose and can cause damage.
  • Page 4: Optional Accessories

    Assembly Optional accessories Jacto SP 312 / SP 416 Jacto SP 312 / SP 416 > Installing the pump lever Item Part Recommended use number number ∙ Lightly grease the orifice on the chamber ∙ For easy assembly, install the lever on Spray hood: prevents nonselective herbicides from drif- top.
  • Page 5 Triple wash containers Assembly Jacto SP 312 / SP 416 Jacto SP 312 / SP 416 5∙ Continue holding the container over 13∙ The least amount of rinse water > Adjusting the shoulder strap the spray tank opening for approximate-...
  • Page 6: Maintenance

    Maintenance Triple wash containers Jacto SP 312 / SP 416 Jacto SP 312 / SP 416 > Triple wash of empty agrochemicals containers After finishing the application, clean and wash all equipment in an approved de- contamination area. Even the containers considered empty, In the case of metal, plastic and glass still contain chemical residues.
  • Page 7: Safety Precautions

    Safety precautions Maintenance Jacto SP 312 / SP 416 Jacto SP 312 / SP 416 > Cylinder maintenance ATTENTION! Remove the pumping rod from the chamber. Loosen the gasket holder and Read carefully the chemicals manufacturer´s labels. remove the assembly.
  • Page 8 Calibration Spray nozzle Jacto SP 312 / SP 416 Jacto SP 312 / SP 416 > Calibration of manual backpack sprayer NOZZLE IDENTIFICATION PRESSURE FLOW RATE USING CALIBRATOR BOTTLE (optional) TYPE (psi) (gallons/minute) Hold the lance at the working height and...

Table of Contents