Moving/Transporting this machine
This section describes how to move or transport this machine.
Moving this machine
This machine weighs approx. 30 kg, so be sure to have it lifted by at least 2 personals.
1
Power off this machine.
2
Remove all cables.
Power cord
LAN cable/USB cable
3
Remove the paper from the paper cassette.
4
Lift this machine and move it to the destination.
When the dedicated caster stand (optional) is installed, unlock the casters (2 places) before moving the
machine.
When the machine is moved to an uneven surface, or when the casters do not move even after you have
unlocked them, remove the anti-tip feet. Refer to
Shipping this machine
This machine weighs approx. 30 kg, so be sure to have it lifted by at least 2 personals.
Do not touch the fuser unit because it is hot.
Because image drums (green parts) can easily get damaged, handle with adequate care.
Do not expose the image drum to direct sunlight or strong light (approx.1,500 lux or above). Do not leave it
uncovered for more than 5 minutes even under room lighting.
Please use the packaging and cushioning materials at purchase of the product.
1
Power off this machine.
2
Remove all cables.
Power cord
LAN cable/USB cable
3
Remove the paper from the paper cassette.
4
Pull the front cover open lever (blue) to open the front cover.
5
Take out the toner cartridge.
Doing so may cause injury.
"Shipping this
machine(P.238)" for the removal procedure.
Doing so may cause injury.
Doing so may cause burns.
- 238 -
Management of this machine