[Auto Config]: The power is turned off automatically if the machine has not been used for a certain period
of time, except in the following situations.
When the LAN cable is connected to the network interface connector
When the wireless LAN is enabled
[Enable]: The power is automatically turned off if this machine has not been used for a certain period of
time.
[Disable]: Disables the Auto Power Off function. The power does not turn off automatically.
Auto Power Off does not work in the following cases.
With the factory default settings, Auto Power Off does not work when a network (wired/wireless) is connected.
When an error has occurred
Follow the procedure below to change the Auto Power Off setting.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power save mode, press «POWER SAVE» to restore.
2
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and
press «OK».
3
Input the admin password using the numeric keypad, and press «OK».
Admin
password(P.194)
4
Press ▼ several times to select [Power Setup], and press «OK».
5
When [Auto Power Off] is displayed, press «OK».
6
Press ▲ or ▼ to select [Auto Config], [Enable] or [Disable], and press «OK».
7
Press «ON LINE» to return to the standby screen.
Changing settings from the operator panel
- 100 -