Oki C650 User Manual page 119

Copies
Duplex
Binding
Media Check
A4/Letter Override
Resolution
Toner Save
Mono-Print Mode
Color Ready Mode
Default Orientation
Edit Size
Trapping
X Dimension
Y Dimension
PS Setup L1 Tray
Network Protocol
USB Protocol
Item
Toner Save Level
Color
Changing settings from the operator panel
Factory
default
settings
1 Sets the number of copies.
The value set in the printer driver takes
priority.
On Sets whether or not to implement duplex
printing.
The value set in the printer driver takes
priority.
Long Edge Specifies the binding method for duplex
printing.
The value set in the printer driver takes
priority.
Enable Sets whether to check the mismatch
between the paper size of the print data and
that of the tray.
Yes Sets the functions of auto switching the
printing paper from A4 to Letter when A4
paper runs out and Letter paper is loaded,
or from Letter to A4 when Letter paper runs
out.
600 dpi Sets the resolution.
The value set in the printer driver takes
priority.
Off Sets the toner save level.
All Specifies whether to apply toner save to
100% black.
Auto Sets the print mode of mono pages.
[Auto] controls the print mode with a good
balance.
[Color Mode] is suitable for printing a large
amount of color pages.
[Normal Mode] is suitable for printing a large
amount of mono pages.
Off Sets whether or not to prepare for the next
color printing after the printing has
completed.
Portrait Specifies the print orientation. For
PostScript, this setting is disabled.
Cassette Sets the size of the drawing area when the
Size size is not specified by the paper size edit
command from a PC.
Off Set when white streaks appear between
adjacent colors.
210 Sets the default value of paper width for
millimeter custom paper sizes.
297 Sets the default value of paper length for
millimeter custom paper sizes.
Type1 Sets the tray selection number of PostScript
level-1 operator commands.
RAW Specifies the PS communication protocol for
network connection.
RAW Specifies the PS communication protocol for
USB connection.
- 119 -
Description
Changing mono print mode(P.170)