Operation; Safety Instructions - KERN HFD Series Operating Instruction

6. Operation

6.1

Safety instructions

(example)
HFD-BA-e-1820
Risk of injury due to falling loads!
Danger

Take great care when operating the crane and follow the
general rules for crane operation.

Check all parts (hook, eyelet, rings, rope slings, cables,
chains etc.) for excessive wear or damage

If faults can be seen on the safety bracket of the hook
or if it is missing completely, the balance must not be
used

Work only with appropriate speed

Always avoid vibrations and horizontal forces. Avoid
any kind of shock, torsion and oscillating (e.g. caused
by inclined suspending)

Do not use the crane scales for transporting loads.

Do not stand or go under suspended loads.

Do not use on building site.

Keep always an eye on suspended loads.

Do not exceed the nominal load of crane, crane scales
or any kind of load attachment devices at the crane
scales.

When weighing dangerous goods such as melted
mass, radioactive material), observe the prescriptions
for handling dangerous goods!
21