Hengstler eXtendo X-56 Operating Manual page 3

eXtendo® Thermal Printer Family
Revision Date
1.00 2008 Jan 28
1.01 2008 Mar 31
1.02 2008 June 27
1.03 2009 Jan 25
1.04 2009 Feb 20
1.05 2009 May 15
1.06 2010 July 19
1.07 2011 April 21
1.08 2012 Aug. 8
1.09 2015 Oct. 5
1.10 2019 Sep. 12
Part No. D-684-124
Document History
Init Status
CBL Closed Initial version
CBL Closed Removed excessive warranty value entries under "Features Selected
at Time of Order". Corrected figure ref. no. under Wiring, Interfacing.
Removed "Heading" format for word "Serial" under Wiring,
Interfacing.
CBL Closed Add note re 15 mm minimum paper length. Removed Basic Firmware
option and 130 mm/sec option. Add print speed of 130 mm/sec max.
for 12/10-36 VDC models. Change 10-39 VDC to 10-36 VDC. Change
Printhead Position description to describe three positions.
Troubleshooting section expanded. Black Mark text clarified. Cutter
Operation text clarified. Change sleep mode current spec to 50µA.
CBL Closed Corrected formatting of columns in serial and USB cable pinout
tables. Company logo changed from graphics to text. Add duty-cycle
specification. Add photo of USB and Multivoltage version for
connector positioning. Add description of connectors on gear side.
Modify paper roll holder text. Modify text to match new photos. Add
note re specifications under Power Supply section. Update paper roll
holders in option chart. Added paper roll holder drawing reference.
Add schematic fragment for PVE/Aux. sensor connection. Add
registered trademark symbol (®) to "eXtendo".
CBL Closed Revise printhead position to two positions (three positions used in
prototypes only). Add "printhead up" status to LED Indicators. Revise
Head Status Sensor to reflect no printing when printhead is up.
Troubleshooting section revised re printhead up operation. Added
printing current specs under Technical Specifications.
CBL Closed Add section on low current operation. Add FCC Part 15 statement.
Add EN55022, EN55024 statements. Add two "General Information"
points. Add "Function" section. Add cable length limitation to
interface specs. Add warning with photo about damaging cutter
bracket when improperly mounted. Remove "Available soon" from
Linux driver reference in intro. Add fanfold paper reference in "Paper"
section. Add explanation for moving cutter blades manually.
CBL Closed Add note about no serial handshaking with sleep mode. Add
explanation of chute sensor/partial-cut. Add mounting hole diagram
and expand mounting comments. Update cover photo. Add
installation of paper guide.
CBL Closed Changed P/N of paper spec document. Correct voltage in print speed
specifications. Increase 24 VDC print speed to 350 mm/sec.
CBL Closed Add clarifying statement re Class B emissions. Add statement about
sunlight on chute sensor. Add definition of area in line with black
mark where only certain inks may be used. Added drawing of PPE
sensor.
Eli Closed Serial data cable pinout corrected. 12V and 10-36V options removed
for X-80. Sensor position 3 in X-56 moved left.
Eli Closed Updating photographs; various corrections, formatting. Added:
polarity information, cutter types, spares, accessories, hints for
grounding and more. Removed multi-volt options.
Mod. No. 4 270919 HW1
Description
page 3 of 33