System Architecture - LEGRAND ELIOT Kit STOP&GO Connected Manual

ELIOT Kit STOP&GO Connected
Cat. N°: 4 149 54

6. SYSTEM ARCHITECTURE

The Stop&Go ELIOT system requires that the Wi-Fi interface and the ADSL Wi-Fi box are always supplied.
(not delivered with the kit)
To do this can be implemented various system structures.
. Supply of the power supply module (cat. no 4 149 45)
It is recommended to take power directly downstream of the main protection device or, in the case it is not possible, upstream of the associated
device to the Stop&Go and to protect the power supply module with a fuse holder or an MCB .
(see § Wiring diagrams)
. Supply of the ADSL Wi-Fi Box
The Wi-Fi module communicates with an ADSL Wi-Fi box
(not delivered with the kit).
In order to prevent an "out of service" of the Wi-Fi box in case of remote/local command or in case of tripping due to failure, the power of Wi-Fi-
box should be taken from a different line from the one on which you installed the Stop&Go or, in the case it is not possible, we recommend to
back up the Wi-Fi box via UPS.
Technical data sheet: F02465EN/01 Updated: 28/03/2019 Created: 06/10/2016
12/16