Set Up Your System - LEGRAND HKRL10 Installation Manual

installation & setup
step seven
Connect your iPhone or iPad (iOS 11 or later) to a 2 4 GHz Wi-Fi
1
using your router utility software
Download and open the free Apple Home app from the App Store
2
Tap the "+" at the top right corner of the screen Follow the in-app directions
3
to complete your device setup When asked to scan your HomeKit Setup Code,
scan the QR code on your device A copy of the QR code is also located on the
front cover of the booklet provided with the device If you're having trouble
scanning the code, you can manually enter the code found on the label
NOTE: If you're having trouble adding the accessory to your Home,
refer to "faqs" on page 15.
|

set up your system

network
®
21