Table of Contents
Advertisement
ELIOT Kit STOP&GO Connected
5. GENERAL CHARACTERISTICS
Wi-Fi module marking:
. Front side marking: by permanent ink pad printing (red line) and
laser marking
Function icon
"ELIOT product" symbol
. Lateral side marking: by laser.
left side: Standard and programming information
right side: cabling and traceability information
Technical data sheet: F02465EN/01
(continued)
Legrand address
Traceability information
Updated: 28/03/2019
Cat. N°: 4 149 54
5. GENERAL CHARACTERISTICS
Wi-Fi Interface Radio-Frequency characteristics:
. Supported frequencies:
Channel
Frequency
. Supported modulations
Standard
802.11b
802.11g
802.11n, HT,
6,5 - 13 - 19,5 - 26 - 39 - 52 - 58,5 - 65
20MHz, 800ns
802.11n, HT,
20MHz, 400ns
. Transmitter output power at maximum setting (antenna gain
included)
Modulation type
Measurement type
802.11b (1Mbps)
802.11g (54Mbps)
802.11n (72.2Mbps)
Characteristics of the fault detection:
. Rd0 (non-operating rated resistance between the live parts and the
earth): 50 kΩ
. Rd (operating rated resistance between the live parts and the
earth): 100 kΩ
. Rcc0 (non-operating rated resistance between the live parts): 1,5 Ω
. Rcc (operating rated resistance between the live parts): 2,5 Ω
. The Stop&Go device can be used in TT and TN earth systems
Impulse withstand voltage:
. Uimp: 4 kV
Insulation rated voltage:
. Ui: 400 V
Pollution degree:
. 2 according to IEC/EN 60664-1.
Overvoltage category:
. III
Dielectric strength:
. 2500 V
Mechanical endurance of Stop&Go:
. 20000 operations.
Electrical endurance of Stop&Go:
. In accordance with the requirements of the standards of the
associated protection device.
Created: 06/10/2016
(continued)
Min
Max.
1
11
2412 MHz
2462 MHz
Supported bit rates (Mbps)
1 - 2 - 5,5 - 11
6 - 9 - 12 - 18 - 24 - 36 - 48 - 54
7,2 - 14,4 - 21,7 - 28,9 - 43,3 -
57,8 - 65 - 72,2
Value (dBm)
RMS
+18,2
RMS
+16,2
RMS
+16,2
10/16
Advertisement
Table of Contents
