Compool CP3000 Installation & Operating Instructions Manual page 36

Operating Instructions
Compool Cp3000
Your Pool Builder will have connected this Remote to the appropriate circuits, and labeled each push-button to suit
your particular application.
The Status Lamp (located in the center of the Spa-Side Remote) will illuminate whenever the spa is being circulated.
Whenever the spa is being heated, the Status Lamp will blink.
SPA-SIDE HEAT BOOST OPTION
If your Spa-Side Remote incorporates a HEAT BOOST push-button, it is possible to manually activate the spa heater,
and boost the spa temperature for a five minute period after the Control System has turned the spa heater off.
This feature can only be activated if the Status Lamp at the Spa-Side Remote is on, and not blinking (i.e. the spa is
being circulated and the heater is not on).
To activate this feature, press the HEAT BOOST push-button. The Status Lamp will blink (during the 5-minute cycle)
to indicate that the spa is being heated. If you wish to turn the heater off at any time during this 5-minute cycle, press
the HEAT BOOST push-button. The Status Lamp will stop blinking to indicate that the spa is no longer being heated.
DISABLING THE SPA-SIDE REMOTE
It is possible to disable the Spa-Side Remote(s) from your Control System. This feature is convenient, if you do not
wish children to play with the Spa-Side Remote or you wish to prevent the unauthorized use of your spa while you are
away from home.
To achieve this, press the "Remote Control at Spa" Key, which is located behind the right-side door of the Cp3000
Controller. If the status lamp is illuminated, the Remote Control is operational. If the status lamp is not illuminated,
the Remote Control is disabled.
33