Page 1
INSTRUCTION MANUAL #1 BY DESIGN OMP HOBBY Thank you for buying products.The is the latest technology in Rotary RC mldels.Please read this manual carefully before assembling and flying the New helicopter. We recommend that you keep this manual for future reference...
Page 2
Be sure to retain the manal for future reference, routine maintenance, and tuning. The M1 is a new product developed by OMPHOBBY. lt features the best design available on the Micro-Heli market to date, providing flying stability for beginners,full aerobatic capbility for advanced fliers, and unsurpassed reliability for customer support.
Page 3
Precautions before use FORBIDDEN LOCATE AN APPROPRIATE LOCATION R/C helicopters fly at high speed ,thus posing a certain degree of potential danger .Choose a legal flying field consisting of flat,smooth groumd without obstacles. Do not fly near buildings,high voltage cables ,or trees to ensure the safety of yourself,others and your model. For the first practice,please choose a legal flying field and can use a training skid to fly for reducing the damage .Do not fly your model in inclement weather,such as rain,wind snow or darkness.
Page 4
EQUIPMENT REQUIRED FOR ASSEMBLY Cutter Knife Scissors Needle Nose Pliers Diagonal Cutting Pliers Philips Screw Drive Hexagon Screw Driver AB Glue AB When you see the marks as below,please use glue or greae to ensure flying safety. Apply BLUE Threadlock Apply Petroleum-Based, Loosely Tighten Light Viscosity Lube...
Page 6
After the cross shaft screws are tightened, please note that the propeller clamp can rotate smoothly. that the propeller clamp can rotate smoothly. that the propeller clamp can rotate smoothly. Socket screw M1.6x3mm Socket screw Damper rubber Washer Washer (M1.6x3mm)x2...
Page 7
2 Bearing-MR63ZZ Socket screw M1.6x5mm Servo Mount Motor Mount Socket screw M1.4X3 Spindle retaining ring Main motor Socket screw Bearing-MR63ZZ Socket screw (M1.6x5mm)x3 (M1.4x2mm)x1 WWW.OMPHOBBY.COM...
Page 8
3 Socket screw M1.4x8mm-L3 Socket screw M1.4x6mm-L2 Copper sets Washer Main Pitch Control Arm M1.4 Nut (M1.4) Swash plate Socket screw (M1.4x8mm-L3)x2 Washer Copper sets Socket screw (M1.4x6mm-L2)x1 M1.4 Nut (M1.4)x1 Metal Servo 3 SET Linkage Ball Servo Arm...
Page 10
CH1 Linkage rod CH2 Linkage rod CH3 Linkage rod CAUTION Socket screw M1.6x3mm Socket screw (M1.6x3mm)x3 Before each flight, please check whether the tail rotor and motor shaft Before each flight, please check whether the tail rotor and motor shaft Before each flight, please check whether the tail rotor and motor shaft match is loose.
Page 11
First, preassemble the left and right side panels of the fuselage and the swash plate phase seat, without locking screws temporarily. plate phase seat, without locking screws temporarily. plate phase seat, without locking screws temporarily. Left side panel Right side panel Socket screw (M1.6x4mm)x4 Socket screw (ST1.4x6mm)-7 Socket screw Socket screw (ST1.4x4mm)-1 ST1.4x4mm Socket screw M1.6x4mm...
Page 14
step 9 Canopy Flight Parameter Setting lntroduction General Flight Model IDLE 1 Model IDLE 1 Model IDLE 2 Throttle Screw Pitch Throttle Screw Pitch Throttle Screw Pitch -100 -100 WWW.OMPHOBBY.COM...
Page 15
Product name: Feathering shaft set Product name: Plastics Main Rotor Holder set Product name: Main Rotor Holder Screw group M1.6*9 M1.6 Package: Hang tag +PE bag Package: Hang tag +PE bag Package: Hang tag +PE bag Package: Hang tag +PE bag...
Page 16
OSHM1022 Package: Hang tag +PE bag Product name: Screw Kit Set Model: OSHM1023 OSHM1021 OSHM1022 Product name: Bearing Set(682zz) Product name: Main chuck gasket set OSHM1023 -682zz 1.4x3=1 M1.4=1 M1.6x3=3 M1.4x6-L2=1 1.4x2=3 M1.6=2 M1.6x4=6 M1.4x8-L3=2 ST1.4x4=6 ST1.4x4=4 M1.6x5=3 M1.6x9-L3=2 ST1.4x6=8 M1.4x3=6...
Page 17
step 11 Package: Hang tag +PE bag Package: Hang tag +PE bag Package: Hang tag +PE bag Package: Hang tag +PE bag Model: OSHM1040 Model: OSHM1041 Model: OSHM1042 Model: OSHM1043 : OSHM1040 : OSHM1041 : OSHM1042 : OSHM1043 Product name: Canopy Set(Racing Yellow) Product name: Landing Skids Set(Charm Orange) Product name:...