OMP Hobby M1 Instruction Manual page 6

step 1
Bearing-682ZZ
Washer
(
Metal main rotor housing
CAUTION
!
横轴螺丝锁紧后，请注意桨夹能够转动顺畅! 横轴螺丝锁紧后，请注意桨夹能够转动顺畅! 横轴螺丝锁紧后，请注意桨夹能够转动顺畅!
After the cross shaft screws are tightened, please note After the cross shaft screws are tightened, please note After the cross shaft screws are tightened, please note
that the propeller clamp can rotate smoothly. that the propeller clamp can rotate smoothly. that the propeller clamp can rotate smoothly.
Socket screw
Washer
(M1.6x3mm)x2
EN
Bearing-682ZZ
CAUTION
!
原装组装完成品，每一次飞行前请先确认螺丝是否已上胶不会松动。 原装组装完成品，每一次飞行前请先确认螺丝是否已上胶不会松动。 原装组装完成品，每一次飞行前请先确认螺丝是否已上胶不会松动。
The original assembled finished product, please confirm whether the screws The original assembled finished product, please confirm whether the screws The original assembled finished product, please confirm whether the screws
were glued and would not loose before each flight. were glued and would not loose before each flight. were glued and would not loose before each flight.
Feathering shaft
Cross shaft Cross shaft
Damper rubber
Washer
(
Main rotor holder
Washer
(
Damper rubber
WWW.OMPHOBBY.COM
6
Bearing-682ZZ
Washer
Washer
Socket screw
M1.6x3mm