Installing And Configuring The Omm; Starting The Rfps - Aastra NeXspan S Installation And Maintenance Manual

4.4 INSTALLING AND CONFIGURING THE OMM

4.4.1 STARTING THE RFPS

Prerequisites
All the RFPs are connected to the network and powered (remotely from the network, or from the
mains unit, depending on the model).
All the RFPS are initialised at start-up through the downloading of the "RFP software" file
ip_rfp.cnt from the TFTP server.
The initialisation takes place in several phases:
Page 44
•
Start of the initialisation process, downloading of the RFP software file
ip_rfp.cnt (booter part of the RFP)
•
Start-up of the OMM application in the real sense of it.
01/2007 AMT/PTD/PBX/0062/1/2EN