Setting And Operator Elements - Siemens OpenAir GEB 1 Series Technical Basics

Cover for DIL switch
(only for GEB16..1)
Push button and LED
at external Interface
Actuator
Arrangement of shaft
adapter
DIL switch
(Legend pos. 3)
GEB16..1
Note
Siemens
Building Technologies
This cover protects the DIL switch against dust and water spray.
The HMI of networked types consists of a push button and an LED to allow certain
interactions with the actuator or to provide visible feedback from the actuator.
2.6

Setting and operator elements

1
2
3
4
5
6
7
For long damper shafts
13 12
Meaning
Counter-clockwise
arrow
Active
DC 2...10 V 2...
DC 0...35 V (Comfort) C
Factory setting for DIL switch.
Technische Grundlagen: Drehantriebe GEB...1
12
11
10
9
8
15
13
11 12
14
DIL switch label Meaning
Clockwise arrow
0 Off
0... DC 0...10 V
0 DC 0...10 V
Legend
1 Housing
2 Rotary angle scale
3 DIL switch and cover
4 Potentiometer to adjust the span
5 Potentiometer to set the offset Uo
6 Mounting bracket
7 Connecting cable for power and
positioning signal
8 Connecting cable for auxiliary switches or
feedback potentiometer
9 Disengagement button for gear train
10 Setting shafts for auxiliary switches A
and B
11 Position indicator
12 Self-centering shaft adapter
13 Locking ring for shaft adapter
14 Adapter for position indicator
15 Adjustment tool for auxiliary switches
(10), potentiometer (4, 5)
For short damper shafts
Function
Rotary angle direction
Self-adaptation
Positioning signal
GEB161.1, GEB166.1
Positioning signal
GEB163.1, GEB164.1
Χ
U
11
11/44
CM2Z4621en
2017-05-26