Download Print this page

Non Spring-Return Actuators; Application - Siemens OpenAir GEB 1 Series Technical Basics

Actuators without spring return

Mounting instructions - 10 pages
Mounting instructions - 10 pages

Introduction

6/44

Siemens

Building Technologies

Non spring-return actuators

This chapter provides information on application, functions, and device combinations.

Furthermore, it contains a type overview and explains the actuator design including

setting and operator elements for this family of actuators.

2.1

The actuators are used in ventilating and air conditioning plants to operate air dampers

and air throttles:

∂

For damper areas up to 3 m

∂

Suitable for modulating controllers (DC 0...10 V) or three-position controllers

(e.g. for outside air dampers).

∂

For dampers having two actuators on the same damper shaft (tandem-mounted

actuators or Powerpack).

Actuators without spring return GEB...1

, friction-dependent.

CM2Z4621en

2017-05-26

Table of Contents

Siemens GEB 1 Series Mounting Instructions 10 pages

Controller Siemens SINAMICS G130 Operating Instructions Manual
Dv/dt filter plus voltage peak limiter (38 pages)
Controller Siemens G2257 Installation Instructions Manual
Remove heating controller (19 pages)
Controller Siemens GDE131.1U Installation Instructions Manual
Openair electronic damper actuator gde/glb rotary non-spring return (7 pages)
Controller Siemens OpenAir G..B181.1E/KN Series Technical Basics
Vav compact controller knx/pl-link (44 pages)
Controller Siemens OpenAir GBB161.1U Technical Instructions
Electronic damper actuators, non-spring return, 24 vac, modulating control (19 pages)
Controller Siemens OpenAir GLB141.1P Technical Instructions
Electronic damper actuators, enhanced non-spring return rotary (16 pages)
Controller Siemens OpenAir G B181.1E/3 Series Technical Basics
Vav modular controller/compact controller (42 pages)