Connection diagrams (networked)
The application controller is connected to the actuator by the bus cable.
Environmental compatibility and
This actuator was developed and manufactured by using environmentally-compatible
materials and by complying with our environmental standards.
For disposal, please remember the following at the end of product life or on defects:
The device consists of
Materials such as steel, aluminum die-cast, and zinc die-cast.
Do not dispose as household garbage. This particularly applies to the circuit board.
See also European Directive 2012/19/EU
As a rule, dispose of all waste in an environmentally compatible manner and in
accordance with environmental, recycling, and disposal techniques.
Adhere to all local and applicable laws.
The aim is to achieve maximum recyclability at the lowest possible pollution. To do
this, note the various material and disposal notes printed on specific parts.
The environmental declarations for these actuators contain detailed information on the
materials and volumes used. Request a declaration at your local dealership.
Actuators without spring return GEB...1