Table of Contents
Advertisement
Industrial Electronic Devices
NEW CONFIGURATION / OPEN CONFIGURATION:
The
"New
Configuration" button creates the folder which contains the entire device's configuration.
A device's configuration can also be imported or exported:
To clone the configurations of a Programmable "BACnet Slave / MQTT - Converter" in
order to configure another device in the same manner, it is necessary to maintain the
folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button
"Open
Configuration".
ADFweb.com S.r.l.
User Manual BACnet Slave / MQTT
Document code: MN67938_ENG
Revision 1.000
Page 14 of 34
Advertisement
Table of Contents
