Table of Contents
Advertisement
Industrial Electronic Devices
If the field
"Enable
DHCP" is checked, the converter acts as DHCP Server for the Clients connected. If the option is enabled, in the
fields
"DHCP First IP
Address" and
Time
(seconds)" the required time for the renewing of the IP Address assigned to the Client is defined;
In the field
"Max
Client" the maximum number of Wi-Fi Clients accepted is defined;
In the field "Channel" the channel for Wi-Fi communication is defined.
The means of the fields for Client configuration are:
If the field
"Obtain an IP Address
gets the IP Address using DHCP. Otherwise, the IP Address is defined as
static;
In the field
"IP
Address" the IP address of the converter is defined;
In the field
"Subnet
Mask" the SubNet Mask of the converter is defined;
In the field "GATEWAY" the default gateway of the net is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature
is used for going out of the net;
In the field "DNS" the DNS address is defined. This field is required if the
server address is define by URL and not IP Address.
In the field "Port" the port used for MQTT communication is defined;
In the field "SSID" the name of the Wi-Fi network to connect is defined;
In the field "Password" the password used to connect to the Wi-Fi network is
defined.
ADFweb.com S.r.l.
"DHCP SUBNET
Mask" the IP Addresses range used for DHCP is defined. In the field
automatically" is checked, the converter
User Manual BACnet Slave / MQTT
Document code: MN67938_ENG
Revision 1.000
Figure 3g: "Set Communication
Page 22 of 34
"Lease
Wi-Fi" window
Advertisement
Table of Contents
