Before Disassembly; Remove Panel And Display Board; Removal Procedure Of Indoor Unit - Tadiran Telecom SMVH09A-2A1B1NA Service Manual

10.4 Removal Procedure of Indoor Unit

Warning
Be sure to wait for a minimum of 10 minutes after turning off all power supplies before disassembly.
Model: SMVH18A-4A1B1NA(I)
Display board
Procedure

1. Before disassembly

2. Remove panel and Display Board

A: Open the front panel.
B: Loosen the screws of the display board with
screwdriver.
C: Push the rotor shaft on both sides of the panel
to make it separate from the groove. Remove
the panel.
3. Remove the filter
Push the filter inward and then draw it upward to
remove it.
Filter
Removal Procedure
Note
61