Temp Button; Clean Button; Clock Button; Timer On Button - Tadiran Telecom SMVH09A-2A1B1NA Service Manual

TEMP button

By pressing this button, you can see indoor set temperature, indoor ambient temperature or outdoor ambient temperature on
indoor unit's display. The setting on remote controller is selected circularly as below:
● When selecting no display with remote controller, temperature indicator on indoor unit displays set temperature.
● When selecting " " with remote controller, temperature indicator on indoor unit displays indoor ambient temperature.
● When selecting " " with remote controller, temperature indicator on indoor unit displays outdoor ambient temperature.
Note:
Outdoor temperature display is not available for some models. At that time, indoor unit receives "
set temperature.

CLEAN button

● The clean mode can not be set in the state of power on; if the air conditioner ran cooling and dry mode before turning off.
Press "CLEAN" button and show "
the clean mode is turned off, or running 10 mins in clean mode then turn off automatically.
● In the first power on, the clean mode is turned off acquiescent.
● The clean mode can not be set and displayed when the air conditioner was in auto,fan and heat mode before turned off.

CLOCK button

Press this button to set clock time. "
clock time. Each pressing of "+" or " -" button,clock time will increase or decrease 1 hour. Press this button again, "
" " icon on remote controller will blink. Press "+" or "- "button within 5s to set clock time. Press this button another time,
" "and " " icon on remote controller will blink. Press "+" or "- "button within 5s to set clock time. If hold "+" or "-" button,
clock time will change quickly. Release when reaching your required time. Press "CLOCK " button to confirm the time, "
stops blinking.
Note:
● Clock time adopts 24-hour mode.
● The interval between two operation can't exceeds 5s. Otherwise, remote controller will quit setting status. Operation for TIMER
ON/TIMER OFF is the same.

TIMER ON button

This button can set the time for timer on. After pressing this button, "
controller blinks. Press "+" or "- "button within 5s to set "TIMER ON" time.Each pressing of "+" or " -" button,the time will increase
or decrease 1 hour. Press this button again, "ON"and "
5s to set the time. Press this button another time, "ON" and "
within 5s to set the time. Hold "+" or " -" button, the time will change quickly until reaching your required time.
Press "TIMER ON" to confirm it.The word "ON" will stop blinking."
Cancel TIMER ON
Under the condition that TIMER ON is started up, press "TIMER ON" button to cancel it.
TIMER OFF button
This button can set the time for timer off. After pressing this button, "
controller blink. Press "+" or "- "button within 5s to set "TIMER OFF" time.Each pressing of "+" or " -" button,the time will increase
or decrease 1 hour. Press this button again, "OFF"and "
5s to set the time. Press this button another time, "OFF" and "
within 5s to set the time. Hold "+" or " -" button, the time will change quickly until reaching your required time.
Press "TIMER OFF" to confirm it.The word "OFF" will stop blinking. "
Cancel TIMER OFF
Under the condition that TIMER OFF is started up, press "TIMER OFF" button to cancel it.
No display
" then the clean mode is turned on; Press "CLEAN"button again, "
"and " " icon on remote controller will blink. Press "+" or "- "button within 5s to set
" icon on remote controller will blink. Press "+" or "- "button within
" icon on remote controller will blink. Press "+" or "- "button within
"icon disappears, "ON" and "
" icon on remote controller will blink. Press "+" or "- "button
" icon resumes displaying.
"icon disappears, "OFF" and "
" icon on remote controller will blink. Press "+" or "- "button
" icon resumes displaying.
Function and Control
" signal, it displays indoor
" disappeared, then
"and
" icon
" icon on remote
" icon on remote
13