Turbo Button; Health Button; Sleep Button; I Feel Button - Tadiran Telecom SMVH09A-2A1B1NA Service Manual

Function and Control
button
Press this button turn on or turn off left & right swing function. The remote controller defaults to static swing condition.
Press "MODE" button and "
swing.
In static swing condition, pressing button, the swing angle of left & right louver changes as below:
When selecting " " with remote controller, it's auto swing. Vertical louver of air conditioner will swing up&down automatically
at the maximum angle.
When selecting " ,
conditioner will stop at that position as shown by the icon to swing.
When selecting " ", it's the circulating swing. Vertical louver of air conditioner will swing circularly according to the angle as
shown by the icon.
Note:
There is no this function for the units. If press this button, the main unit will sound, but it also runs under original status.
+ and - button
Press "+" or " -" button once to increase or decrease 1℃ of set temperature.
Holding "+" or "- " button, set temperature on remote controller will change quickly. On releasing button after setting is finished,
temperature indicator on indoor unit will change accordingly. (Temperature can't be adjusted under auto mode)
When setting TIMER ON, TIMER OFF or CLOCK, press "+" or " -" button to adjust time (Refer to CLOCK, TIMER ON, TIMER
OFF buttons).

TURBO button

Press this button to turn on or turn off the TURBO function under cool、heat、fan mode.
Note:
● Press "QUIET" or "FAN" button the unit will quit this function.
● This function is no use under auto mode or dry mode.

HEALTH button

Press this button to turn on or turn off the health function.

SLEEP button

Press this button to turn on or turn off the SLEEP function under cool、heat、dry mode.
Note:
This function is off as defaulted after power on.
●
It will be cleared after changing mode.
●
It is no use under "FAN" mode and "AUTO" mode.
●

I FEEL button

(Some models no this function)
Press this button to start I FEEL function and "
remote controller will send the detected ambient temperature to the indoor unit and the unit will automatically adjust the indoor
temperature according to the detected temperature. Press this button again to close I FEEL function and "
Note:
Please put the remote controller near user and confirm the unit can receive the remote code when this function is set. Do not
put the remote controller near the object of high temperature or low temperature in order to avoid detecting inaccurate ambient
temperature.
12
" button at the same time at remote controller OFF to switch between simple swing and static
No display
, , , , " with remote controller,it's the fixed position swing. Vertical louver of air
" will be displayed on the remote controller. After this function is set, the
" will disappear.