Tadiran Telecom SMVH09A-2A1B1NA Service Manual page 62

Procedure
Electric box
Motor press plate
Note
7. Remove electric box
A: Disconnect the indoor tube temperature
sensor.
B: Remove the screws at the joint of the
earthing wire and evaporator.
C: Loosen the clasp at the joint of the electric
box.
8. Remove evaporator
A: Remove the screws at the joint of the
evaporator and rear case.
B: Adjust slightly the pipe on the evaporator to
separate the pipe with the evaporator.
C: Remove the evaporator to separate the
evaporator with rear case assy.
9. Remove motor press plate
Remove the screw of the motor press plateand
then remove the press plate.
Removal Procedure
59