Disassembly Instructions; Remove The Grille; Remove The Electrical Control Box; Remove The Installation Plate - Tadiran Telecom TGI-07H Technical Manual

12. DISASSEMBLY INSTRUCTIONS

1 Remove the grille

1. Open the screw cover of the grille.
2. Take out the screws of the grille.
3. Hold both sides of the grille and drag it
upwards by moving it around the outlet grille.

2 Remove the electrical control box

1. Remove the cover of the electrical control box
2. Take the indoor coil sensor from the sensor bracket.
3. Remove the switching board.
4. Take out the screws of the terminal board and
remove the terminal board.
5. Disconnect the connectors of the printed circuit board.
6. Remove and check-up the printed circuit board.
7. Disconnect all the connectors of the electrical control box.
8. Take out the screws of the electrical control box and
remove the electrical control box.

3 Remove the installation plate

1. Take out the screws of the installation plate.
2. Remove the installation plate.
TGI-07H ,TGI-09H ,TGI-12H
39
Front Panel
Screws
Screw
Sensor Bracket
Printed Circuit Board
Terminal Board
Screws
Screw
Installation Plate