Hang The Indoor Unit - Tadiran Telecom SMVH09A-2A1B1NA Service Manual

Step 9: Hang the indoor unit
1. Put the bound pipes in the wall pipe and then make them pass through the wall hole.
2. Hang the indoor unit on the wall-mounting frame.
3. Stuff the gap between pipes and wall hole with sealing gum.
4. Fix the wall pipe.
5. Check if the indoor unit is installed firmly and closed to the wall.
Note:
● Do not bend the drain hose too excessively in order to prevent blocking.
Note:
The through-wal height of drain hose shouldn't be higher than the outlet pipe hole of indoor unit.
The water outlet can't be placed in water in order to drain smoothly.
Slant the drain hose slightly downwards. The drain hose can't be curved, raised and fiuctuant,etc.
The drain hose can't be fluctuan.
indoor outdoor
wall pipe
sealing gum
upper hook
lower hook of
wall-mounting frame
the drain hose can't
raise upwards.
The drain hose
can't be fluctuant
Installation Manual
The water outlet can't
be placedin water
The water outlet
can't be fluctuant.
23