Installing The Indoor Unit On Hard Surface; Installing The Indoor Unit Directly On The Ceiling - Tadiran Telecom ANL-100 Service Manual

SKY
7.6 Installing the Indoor Unit
AB SOR BTION
CUSHION
B
C
LONG CEILING
ANCHOR S
Model
ANL-100
AVL-100
AVL-120
AVL-140
• Allow free access to the service door, air filter and control box.
• Carefully plan the drainage tube path at a minimum slope of 2% avoiding sharp bends or oil
traps.
• The indoor unit may be installed either hanging from the ceiling or resting on hard surface
(i.e. concrete).
• Whenever possible, lead the indoor unit drainage tube to the outdoor unit.

7.6.1 Installing the Indoor Unit on Hard Surface

• Stick four rubber absorbtion cushions on the four corners of the base, as shown in Fig. 7-4.
• Select the installation location according to the abovementioned factors and guidelines.

7.6.2 Installing the Indoor Unit Directly On the Ceiling

• Select the installation location according to the abovementioned factors and guidelines.
• Mark 4-6 holes on the ceiling, according to the unit's mounting bracket holes.
• If the ceiling is made of concrete, drill holes for the long ceiling anchors.
• Stick four rubber absorbtion cushions on the four corners of the base, as shown in Fig. 7-5.
• Attach the unit to the ceiling using the long anchor screws, as shown in Fig. 7-5.
D
A
A mm B mm
1300 580
1500 480
1600 550
1600 660
AB SOR BTION
CUSHION
E
B
C
LONG CEILING
ANCHOR S
Fig. 7-5
Dimensions
C mm
800
700
800
800
- 28 -
D
D mm E mm
400 345
970 295
1190 345
1190 345
E
A