Switching On And Off / Automatic Shut-Down; Start-Up - Powerfix Profi HG00384B Operation And Safety Notes

Switching on and off /
Automatic shut-down
B riefly press the ON/OFF button
switch the device on or off.
Note: If you do not press any button for one
minute after the device has been switched on,
the device automatically switches off.

Start-up

B riefly press the ON/OFF button
switch the device on (Fig. A). A selection of
menu points appears at the bottom of the
display
2
T he selection arrow (▼)
point for Beam search (STUD)
device is switched on. Bring the selection
arrow over the desired menu point by repeat-
edly pressing the selection button (►)
meaning of the individual menu points are:
; Wooden beam search
: Metal search
: Void search
: Power line search
G uide the detector over a location on the
surface to be examined, where you know that
there is no object, which you are looking for.
Then press the PUSH button
pressed down. Guide the detector, with the
underside flat, over the surface to be exam-
ined. It is possible that during this some short
signal tones may sound. These are however
without any meaning, so long as no intensity
10 GB/IE
:
4
4
(Fig. A)
is over the menu
10
, when the
14
and keep it
5
to
to
. The
3