Led Lighting Test; Audit - Sega Sonic Allstarts Manual

3.LED Lighting Test

Testing
1. Press
mode. Release the test button until is displayed "1" on the LED.
2.Check if the LED is displayed correctly.
3.When testing is finished you will enter into the standby function.
XXXXXXXX
4.After AUTO test is finished, it will enter into standby function.

4.AUDIT

Press
Press
Press
Press
and turn on the power in the same time to enter LED testing
LED test function display
LED displays Company logo, from right to left.
LED display 1 2 3 4 5 6 7 8 9 ,color test change from
red
Coin LED display 1 2 3 4 5 6 7 8 9 ,color test red .
enter into audit system in standby function only.
then release, enter into audit 1
COUNT - IN
1 C X X X X X X
then release, enter into audit 2
COUNT - OUT
2 C X X X
then release, enter into audit 3
SHIFT - IN
3 C X X X
- 30 -
green then orange .
Record total received
Coins up to 999999 same as counter,
counter reset is not allowed.
Record total dispensed tickets
X X X
Tickets up to 999999 same as counter,
no counter reset is not allowed.
X X X Record total received
Coins up to 999999,
counter reset is allowed.