Table of Contents
Advertisement
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.
Field
TCP/IP Setup
IP
Address
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based
RIP Direction Press the space bar to select the RIP direction from Both/None/In
Version Press the space bar to select the RIP version from RIP-1/RIP-
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm...] to
save your configuration, or press [Esc] at any time to cancel.
3-6
Table 3-2 TCP/IP Ethernet Setup Menu Fields
Description
Enter the IP address of your Prestige in dotted decimal notation
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige
Only/Out Only.
2B/RIP-2M.
Prestige 201 ISDN Access Router
Example
192.168.1.1
(default)
255.255.255.0
Both
RIP -1
Internet Access
Advertisement
Table of Contents
Troubleshooting
