Table 3-1 Dhcp Ethernet Setup Menu Fields; Table 3-2 Tcp/Ip Ethernet Setup Menu Fields - ZyXEL Communications Prestige 645R User Manual

Adsl router
Hide thumbs Also See for Prestige 645R:
Table of Contents

Advertisement

Prestige P645 ADSL Internet Access Router
Follow the instructions in the following table on how to configure the DHCP fields.
FIELD
DHCP Setup
DHCP= If it is set to Server, your Prestige can assign IP addresses, an
Client IP Pool Starting
Address
Size of Client IP Pool This field specifies the size, or count, of the IP address pool.
Primary DNS Server
Secondary DNS
Server
Remote DHCP
Server
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.
FIELD
TCP/IP Setup
IP
Address
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based
RIP
Direction
Version Press the [SPACE BAR] to select the RIP version from RIP-1, RIP-
3-6

Table 3-1 DHCP Ethernet Setup Menu Fields

IP default gateway and DNS servers to Windows 98, Windows
2000 and other systems that support the DHCP client. If set to
None, the DHCP server will be disabled. If set to Relay, the
Prestige acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the
clients. Enter the IP address of the actual, remote DHCP server
in the Remote DHCP Server in this case.
When DHCP is used, the following items need to be set:
This field specifies the first of the contiguous addresses in the
IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and
the subnet mask.
If Relay is selected in the DHCP= field above, then enter the IP
address of the actual, remote DHCP server here.

Table 3-2 TCP/IP Ethernet Setup Menu Fields

Enter the (LAN) IP address of your Prestige in dotted decimal
notation
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige
Press the [SPACE BAR] to select the RIP direction from Both, In
Only, Out Only or None.
2B or RIP-2M.
DESCRIPTION
DESCRIPTION
EXAMPLE
Server
(default)
192.168.1.33
32
EXAMPLE
192.168.1.1
(default)
255.255.255.0
Both
(default)
RIP-1
(default)
Internet Access

Advertisement

Table of Contents
loading

Table of Contents