Smt Menu 3: Tcp/Ip Lan Setup; Figure 3-7 Menu 3.2 - Tcp/Ip And Dhcp Ethernet Setup; Table 3-4 Tcp/Ip Ethernet Setup Menu Fields - ZyXEL Communications Prestige 650M User Manual

Prestige 650M ADSL Bridge
3.7

SMT Menu 3: TCP/IP LAN Setup

The Ethernet parameters of the Prestige are preset in the factory with the following values:
IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits).
Use menu 3.2 to configure the IP address of your Prestige. You need to do this to be able to manage yopur
Prestige.
To edit menu 3.2, enter 3 from the main menu to display Menu 3 – Ethernet Setup. When menu 3 appears,
press 2 and press [ENTER] to display Menu 3.2 – TCP/IP and DHCP Ethernet Setup, as shown next
Menu 3.2 - TCP/IP Ethernet Setup
TCP/IP Setup:
Press ENTER to Confirm or ESC to Cancel:
Figure 3-7 Menu 3.2 – TCP/IP and DHCP Ethernet Setup
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.
FIELD
TCP/IP Setup
IP Address
IP Subnet Mask
When you have completed this menu, press [
your configuration, or press [
3-8
IP Address= 192.68.1.1
IP Subnet Mask= 255.255.255.0

Table 3-4 TCP/IP Ethernet Setup Menu Fields

Enter the (LAN) IP address of your Prestige in dotted decimal
notation
Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige.
ESC
] at any time to cancel.
DESCRIPTION
ENTER
] at the prompt "Press ENTER to Confirm..." to save
This is the IP address of the Prestige.
Your computer must be in the same
subnet as the Prestige in order to be
able to communicate with it.
:
EXAMPLE
192.168.1.1
255.255.255.0
Initial Setup