Table of Contents
Advertisement
8.3
Diagnostic
The diagnostic facility allows you to test the different aspects of your Prestige to determine if it is working
properly. Menu 24.4 allows you to choose among various types of diagnostic tests to evaluate your system,
as shown below.
ISDN
TCP/IP
Follow the procedure below to get to Diagnostic
Step 1.
From the Main Menu, select option 24 to open Menu 24 - System Maintenance.
Step 2.
From this menu, select option 4. Diagnostic. This will open Menu 24.4 - System Maintenance -
Diagnostic.
The following table describes the diagnostic tests available in Menu 24.4 for your Prestige and the
connections.
Field
Hang Up B1 Call
Hang Up B2 Call
Reset ISDN
ISDN Connection
8-10
Menu 24.4 - System Maintenance - Diagnostic
1.
Hang Up B1 Call
2.
Hang Up B2 Call
3.
Reset ISDN
4.
ISDN Connection Test
5.
Manual Call
11. Internet Setup Test
12. Ping Host
Enter Menu Selection Number:
Manual Call Remote Node= N/A
Host IP Address= N/A
Figure 8-9 Menu 24.4 - System Maintenance - Diagnostic
Table 8-4 System Maintenance Menu Diagnostic
Description
This tool hangs up the B1 channel. This is only applicable if the B1 channel is
currently in use.
This tool hangs up the B2 channel. This is only applicable if the B2 channel is
currently in use.
This command re-initializes the ISDN link to the telephone company.
You can test to see if your ISDN line is working properly by using this option.
Prestige 201 ISDN Access Router
System
21. Reboot System
22. Command Mode
System Maintenance
Advertisement
Table of Contents
Troubleshooting
