Table of Contents
Advertisement
Prestige 201 ISDN Access Router
Chapter 4
Remote Node Configuration
This chapter helps you in configuring the remote node.
A remote node is required for placing calls to a remote gateway. A remote node represents both the remote
gateway and the network behind it across a WAN connection. Note that when you use Menu 4 to set up
Internet access, you are actually configuring one of the remote nodes. Once a remote node is configured
correctly, traffic to the remote network will trigger your Prestige to make a call automatically, i.e., Dial on
Demand. Your P201 supports one remote node only.
4.1
Remote Node Setup
4.1.1 Remote Node Profile
To configure a remote node, follow these steps:
Step 1.
From the Main Menu, select menu option 11 to open Menu 11- Remote Node Profile.
Remote Node Configuration
4-1
Advertisement
Table of Contents
Troubleshooting
