Call Control; Figure 8-14 Menu 24.9 - System Maintenance - Call Control - ZyXEL Communications P-202 User Manual

8.6

Call Control

The Prestige provides four call control functions: call control parameters, blacklist, budget management and
call history.
Call control parameters allows you to set a dial out time limit, the number of times a number should be called
before it is added to the blacklist and the interim between calls.
The budget management function allows you to set a limit on the total outgoing call time of the Prestige over
a period of time. When the total outgoing call time exceeds the limit, the current call will be dropped and any
future outgoing calls will be blocked.
The blacklist function prevents the Prestige from re-dialing to an unreachable phone number. It is a list of
phone numbers, up to a maximum of 14, to which the Prestige will not make an outgoing call. If the Prestige
tries to dial to a phone number and fails a certain number of times (configurable in Menu 24.9.1), then the
phone number is put in the blacklist. You will have to enable the number manually before the Prestige will
dial that number again.
Call history chronicles preceding incoming and outgoing calls.
To enter the call control menu, select option 9. Call Control in Menu 24 to go to Menu 24.9 - System
Maintenance - Call Control, as shown in the table below.

Figure 8-14 Menu 24.9 - System Maintenance - Call Control

8-14
Menu 24.9 - System Maintenance - Call Control
1. Call Control Parameters
2. Blacklist
3. Budget Management
4. Call History
Enter Menu Selection Number:
Prestige 201 ISDN Access Router
System Maintenance