ZyXEL Communications P-202 User Manual page 128

PABX, 2-12
PAP, 4-3
Password, 2-3, 2-7, 4-3
Ping, 8-11
Point-to-Multipoint, 2-13
Point-to-Point, 2-13
Power Adapter, 2-2
Prestige Network Commander, 1-3
Private, 5-3
RAS code, 10-7
Relay, 3-5
Remote Node, 4-1, 8-3, 8-11
Remote Node Profile, 4-2
Remote Node Setup, 2-6, 4-1
Resetting the Prestige, 2-7
ROM File, 10-8
Routing Information Protocol, 3-2
Service Profile Identifier. See SPID
Single User Account, 1-4, 3-9, 3-10
SMT Interface Summary, 2-6
software update, 10-7
SPID, xiv
SUA. See Single User Account
Subnet Mask, 3-2, 3-6, 5-2
Switch Type, 2-10, 11-2
Syntax Conventions, xv
Syslog, 8-8
Syslog IP Address, 8-8
System
Boot module commands, 8-13
Call Control, 8-14
Command Interpreter Mode, 8-13
D
P
R
S
Prestige 201 ISDN Access Router
Console Port Speed, 8-6
Diagnostic, 8-10
Log and Trace, 8-7
Syslog And Accounting, 8-8
System Information, 8-5
System Status, 8-2
System Maintenance
Backup
Console Port, 10-1
FTP, 10-2
TFTP, 10-2
Restore, 10-4
Console Port, 10-4
FTP, 10-6
TFTP, 10-6
System Management Terminal, 2-5
System Name, 2-9
System Timeout, 7-2
TCP/IP, 8-11
TCP/IP Ethernet Setup and DHCP, 3-4
TCP/IP Setup, 3-6
Telco Options, 3-9
Telnet, 7-1
Single Administrator, 7-2
Telnet Under SUA, 7-1
TFTP, 10-11
time and date setting, 8-18, 8-19
Troubleshooting
ISDN Line, 11-2
LAN Interface, 11-3
Remote Node or ISP, 11-3
Starting Up the Prestige, 11-1
UNIX Syslog, 8-8
UTP, 2-2
T
U
Index