Table 4-1 Dhcp Ethernet Setup Menu Fields; Table 4-2 Tcp/Ip Ethernet Setup Menu Fields - ZyXEL Communications Prestige 681 User Manual

Sdsl router
Hide thumbs Also See for Prestige 681:
Table of Contents

Advertisement

Prestige 681 SDSL Router
Field
DHCP Setup
DHCP= If this field is set to Server, your Prestige can assign IP
Client IP Pool Starting
Address
Size of Client IP Pool This field specifies the size, or count, of the IP address pool.
Primary DNS Server
Secondary DNS
Server
Remote DHCP
Server
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.
Field
TCP/IP Setup
IP
Address
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based
RIP
Direction
Version Press the [SPACE BAR] to select the RIP version from RIP-1/RIP-
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm...] to
save your configuration, or press [Esc] at any time to cancel.
4-6
Table 4-1
DHCP Ethernet Setup Menu Fields
Description
addresses, an IP default gateway and DNS servers to Windows
95, Windows NT and other systems that support the DHCP
client. If set to None, the DHCP server will be disabled. If set to
Relay, the Prestige acts as a surrogate DHCP server and
relays DHCP requests and responses between the remote
server and the clients. Enter the IP address of the actual,
remote DHCP server in the Remote DHCP Server in this case.
When DHCP is used, the following items need to be set:
This field specifies the first of the contiguous addresses in the
IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and
the subnet mask.
If Relay is selected in the DHCP= field above, then enter the IP
address of the actual, remote DHCP server here.
Table 4-2
TCP/IP Ethernet Setup Menu Fields
Description
Enter the (LAN) IP address of your Prestige in dotted decimal
notation
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige
Press the [SPACE BAR] to select the RIP direction from Both/In
Only/Out Only or None.
2B/RIP-2M.
Example
None
Server (default)
Relay
192.168.1.33
32
Example
192.168.1.1
(default)
255.255.255.0
Both (default)
RIP-1 (default)
Internet Access

Advertisement

Table of Contents
loading

Table of Contents