Isdn Advanced Setup; Figure 2-10 Menu 2.1 - Isdn Advanced Setup; Table 2-5 Isdn Advanced Setup Fields - ZyXEL Communications P-202 User Manual

Prestige 201 ISDN Access Router
Field
ISDN Data
Edit Advanced
Setup
Edit NetCAPI
Setup

2.10.2 ISDN Advanced Setup

Select Yes in the Edit Advanced Setup field of Menu 2 – ISDN Setup to display menu 2.1 as shown next.
Field
Calling Line Indication
PABX Outside Line Prefix
Hardware Installation & Initial Setup
Enter the telephone number assigned to ISDN data calls for the Prestige. The
maximum number of digits is 25 for the telephone number.
Advanced Setup features are configured when you select Yes to enter 2.1
Advanced Setup menu (see ahead).
You can configure NetCAPI setup when you select Yes and enter Menu 2.2 -
NetCAPI Setup.
Menu 2.1.1 - ISDN Advanced Setup
ISDN Line= 1
Calling Line Indication= Enable
PABX Outside Line Prefix=
PABX Number (Include S/T Bus Number) for Loopback=
Outgoing Calling Party Number:
ISDN Data
Data Link Connection= point-to-multipoint
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.

Figure 2-10 Menu 2.1 - ISDN Advanced Setup

Table 2-5 ISDN Advanced Setup Fields

Description
The Calling Line Indication, or Caller ID, governs whether the other party can
see your number when you call. If set to Enable, the Prestige sends the caller
ID and the party you call can see your number; if it is set to Disable, the caller
ID is blocked.
A PABX (Private Automatic Branch eXchange) generally requires you to dial a
number (a single digit in most cases) when you need an outside line. If your
Prestige is connected to a PABX, enter this number in PABX Outside Line
Prefix, otherwise, leave it blank. Please note that the PABX prefix is for calls
initiated by the Prestige only.
Description
=
2-11